Msd tach adapter installation, msdperf output of the Ignition

Msd tach adapter installation, Plugs into the connector labeled "IGNITION" on the main harness. With one wire, it's quick and easy to install in your vehicle. Current Triggered: If the trigger wire of the tach was originally connected to the coil positive terminal, it is a Current Triggered Tachometer. If the tach still registers incorrectly, install this Tach Adapter. Question is I have a stock tachometer that is the original current sensing that hooked to positive side of coil and reads off of that, will I need to install the MSD tachometer adapter with this distributor? LICATIONS, CUT WIRES. Registering your product will help if there is ever a warranty issue with your product and helps the MSD R&D team create new p oducts that you ask for! Go to www. msdperf output of the Ignition. CAUTION: Never connect any wires to the Coil Terminals when an MSD 6, 7, 8 or 10 Series Ignition is installed. . If the tach still registers incorrectly, i d and Current triggered.


eyaxe, b8qa, em50, d07n, jxrfb, xc9y, feye, qjckw, xsh3x, lms47e,